Headlights tinting - This is the process of applying a special tinted film to the front or rear optics of a car. Headlight tinting is the best way to give your headlights a stylish look, as well as protect them from fading, clouding, and stone and gravel damage.
At our installation center, you can tint your headlights with vinyl or polyurethane film.
Headlight tinting cost:
| Headlight size | Polyurethane film, material with work | Vinyl film, material with work |
| Small headlights (eg Daewoo Matiz) / 2 pcs. | 2000 from UAH | 1600 from UAH |
| Middle headlights (BMW X5, Mazda 6) / 2 pcs. | 2400 from UAH | 1900 from UAH |
| Large headlights (Toyota Land Cruiser, Fiat Doblo) / 2 pcs. | 3000 from UAH | 2200 from UAH |
Vinyl film for tinting headlights has a special adhesive base, applied to the headlights, as a rule, on dry or water, depending on the complexity of the design of the headlights.
Polyurethane film for headlight tinting is applied with a soapy solution, which allows you to install it better, without the formation of air bubbles and stretch marks.
The service life of the vinyl film for headlights is on average from one to 3 years, after which it becomes cloudy.
Service life of a polyurethane film for headlights is more than 10 years.
In terms of strength, the polyurethane film is more resistant to penetration and tensile and, in addition to decorative properties, gives the headlights a high degree of protection against damage by stones and gravel when driving on the highway.
How to tint headlights with film:
- Assessment of the state of the headlights. Before applying the film, headlights should be inspected for damage such as headlight scratches, abrasions and haze. At this stage, the master determines whether the headlights need to be sanded or polished. If the headlights are in perfect condition, then you can start gluing the film without polishing the headlights.
- Headlight polishing. On the headlights of cars with mileage, very often there are scratches and scuffs, their master removes them with the help of phased grinding, followed by polishing the headlights with a machine.
- Headlight tinting. After giving the headlights newness and shine, the master degreases the headlights and applies a tinted film. in this case, a special tool is used (squeegee, a bottle of soapy water, cutting knives and blades).